Morse drum tumblers have the ability to lift and tumble drums "corner-over-corner" to mix 55 gallon drums. The drum tumbler holds your drum on an angle to rotate the 55 gallon drum with aggressive "corner-over-corner" action to agitate the contents and mix them thoroughly. Mix ingredients directly inside closed 55 gallon drums without exposing workers to harsh chemicals. Morse 55 gallon drum tumblers save time and money.
| Item# |
Item Name |
|
Qty |
Add |
| GEK-310-1-115 |
KIT, ENCLOSURE W/ SAFETY INTERLOCK, FOR MODEL 310-1-115 |
|
|
|
| GEK-310-A |
KIT, ENCLOSURE W/ SAFETY INTERLOCK, FOR MODEL 310-A |
|
|
|
| GEK-310-E1-115 |
KIT, ENCLOSURE W/ SAFETY INTERLOCK, FOR MODEL 310-E1-115 |
|
|
|
| 310-1-115 |
TILT-TO-LOAD DRUM TUMBLER, 5-20 RPM, 1-PHASE 115V TEFC MOTOR |
|
|
|
| 310-3-230 |
TILT-TO-LOAD DRUM TUMBLER, 5-20 RPM, 3-PHASE 230V TEFC MOTOR |
|
|
|
| 310-3-460 |
TILT-TO-LOAD DRUM TUMBLER, 5-20 RPM, 3-PHASE 460V TEFC MOTOR |
|
|
|
| 310-A |
TILT-TO-LOAD DRUM TUMBLER, 5-20 RPM, AIR MOTOR |
|
|
|
| 310-E1-115 |
TILT-TO-LOAD DRUM TUMBLER, 5-20 RPM, EXLPOSION-PROOF 1-PHASE 115V MOTOR |
|
|
|
| 310-E3-230 |
TILT-TO-LOAD DRUM TUMBLER, 5-20 RPM, EXPLOSION-PROOF 3-PHASE 230V MOTOR |
|
|
|
| 310-E3-460 |
TILT-TO-LOAD DRUM TUMBLER, 5-20 RPM, EXPLOSION-PROOF 3-PHASE 460V MOTOR |
|
|
|
| Check the items you wish to purchase, then click
|
|
More Information:
55 Gallon Drum Tumblers | Morse Tilt-to-Load Drum Rotator
Morse 310 Series Tilt-To-Load Drum Rotators have power-lift, and tumble drum "corner-over-corner" to thoroughly mix contents. The drum tumbler holds your drum on an angle to rotate drum with aggressive "corner-over-corner" action.
|
|
- 29" to 37" tall drum
- 18" to 23.5" diameter
- Variable speed: 5 to 20 RPM
- Capacity:
- 800 Lb. full drum
- 400 Lb. half-full drum*
- Motor is 2 HP, 60 Hz.
- Drum tumbler Dimensions
|
Drum Holder on Tilt-To
-Load Drum Tumblers
Support your drum with base plate under drum,
2 clamps at top of drum and cinch chain around drum.
|
|
|
Loading drum into drum
rotator with drum truck
|
1. Quickly load upright drum into the Morse drum tumbler at floor level with drum truck, Model 81 Drum Spotter or hoist attachment (Loading with Model 160-WP shown).
|
|
Secure drum in holder of
drum rotator
|
2. Using the cinch chain around drum and two top clamp, s
ecure your drum in drum rotator.
|
|
Rotate drum
|
3. To activate drum tumbler hydraulics turn motor on.
|
|
|
4. Tilt drum to top position with RAISE control valve
5. Begin drum rotation with the ROTATE control valve
|
|
Install all Morse Tumblers in accordance with OSHA requirements for enclosure and safety interlock, etc. Drum rotator must automatically turn off when enclosure door is opened.
|
|
Enclosure with safety
interlock for drum rotator
|
-
Enclosure with safety interlocks will automatically shut off the drum tumbler when the enclosure is opened.
-
Safety Enclosures with Automatic Control Package allow you to load the drum, close the enclosure, set the rotation time, and walk away. The rotator will automatically lift the drum, rotate for the time you set, then lower the drum to upright at floor-level for easy access.
Outside post-to-post Dimensions: L88” x W52” x H74”
For OSHA compliance, see OSHA subpart O.1910.212 "General Requirements for all Machines." Power connections and motor controls must comply with applicable codes.
|
Morse Drum Tumbler Product Documents:
|
|
