55 Gallon Drum Lift Hoist Attachments - Below-Hook Drum Lifters

Every Morse Below-Hook Drum Lifter is load tested at the factory as per American National Standard ASME B30.20 and a load test certificate is enclosed with each unit.

Model 86 Drum Lifter

Verti-Karrier Drum Lifters

Drum Lift for Steel Drum or Overpack

Drum Lifters for Plastic, Fiber or Steel Drum

Drum Lifting Hook

Drum Sling

Fork Hook

Model 86 Drum Lifter Hoist Attachment - Below the Hook Barrel Lift

Model 86 Below-the-Hook
55 Gallon Barrel Lifter for plastic, fiber or steel drums

Vertical drum lifter hoist attachments for material handling safety. Lift 55 gallon drums easily with your crane.

Below-the-hook barrel lifter to transport drum in an upright position. Your drum is continually supported on a bar at the bottom and secured in the drum holder with a chain around the drum. This 55 gallon drum lifter attaches to your monorail, crane, or chain block. Using Morse Fork Hook, you may also attach barrel lift to forklift.

Handle a variety of drums

• Steel, plastic or fiber drum
• 23" to 38" (58.4 to 96.5 cm) tall drum
• 22" to 23.5" (55.9 to 59.7 cm) diameter drum
• Accepts Diameter Adaptors for smaller drums
• Capacity: 1,000 Lb. (454 kg)

Each Model 86 below the hook Drum Lifter is load tested at the factory at 125% of rated capacity in accordance with the American National Standard ASME B30.20 and a load test certificate is included with each unit.

90 Series Verti-Karrier Drum Lifters

Model 90 Verti-Karrier
hoist attachment

Model 90-SS Stainless Steel
Drum Lifter

Use 90 Series hoist attachments to grab and lift your drum. Then move and place your drum almost anywhere.

Load a drum to and from remote or hard-to-reach areas

1. Attach the Verti-Karrier drum grab to your hoist or crane
2. Move drum lifter and lower onto the top of drum
3. As the drum grab is elevated it will grip the drum automatically
4. When the drum is lowered to the ground, the drum grab carriage drops down and automatically locks in the open position, releasing the load
5. The Verti-Karrier drum grab is then ready to lift another drum

The grip will not disconnect until the drum is fully down. You only need to operate your hoist to guide the drum grab into position. This saves the operator time and protects against dangerous climbing.

Capacity: 1,000 Lb. (454 kg). Each 90 Series Verti-Karrier is load tested at the factory at 125% of rated capacity in accordance with the American National Standard ASME B30.20 and a load test certificate is included with each unit.

Model 90, 90M and 90-SS are sized for your 55-gallon steel drum (208 liter steel drum). These have three different settings, and should be adjusted to grip the sidewall under the rim of your drum. Set in the top hole it will grip to 22-1/16” (56 cm), middle hole to 22-3/16” (56.4 cm), and bottom hole to 22-7/16” (57 cm).

Morse Verti-Karrier Drum Lifter Series are NOT for drums without lids or tops in place.

90 Series Verti-Karrier Drum Lifters

• Model 90 Verti-Karrier drum lifter for 55-gallon (208 liter) steel drum with
  22-1/16" (56 cm) to 22-7/16" (57 cm) diameter
• Model 90-SS stainless steel drum lifter (shown left) is made of type 304 stainless steel and is for handling same drum as model 90
• Model 90M drum lifter has spark resistant parts made of monel and is for handling same drum as model 90
• Model 90-30 drum lifter is similar to Model 90, but is sized for a typical 30-gallon (114 liter) steel drum with 18-1/16" to 18-7/16" (45.9 to 46.8 cm) diameter
• Model 90-85 is our drum lifter sized for typical 85-gallon (322 liter) steel overpack or salvage drum with 25-1/16" to 25-7/16" (63.7 to 64.6 cm) diameter

Model 91 Drum Lift for Steel 55-Gallon Drum or Overpack

This drum lift allows you to:

• Lift a steel 55-gallon (208 liter) drum and place it into an overpack or salvage drum
• Lift steel 85-gallon (322 liter) overpack drum
• Lift closed salvage drum

An effective and simple-to-use drum lift with carefully designed ice-tong-like geometry and broad faced, thin profile grippers.

Its broad grippers spread, holding force to minimize pressure on the drum. The narrow profile enables it to lower drum completely into an overpack drum.

Each model 91 Drum Lifter is load tested at the factory at 125% of rated capacity in accordance with the American National Standard ASME B30.20 and a load test certificate is enclosed with each unit.

Capacity: 1,000 Lb. (454 kg).

Shipping weight: 18.5 Lb. (8.27 kg) Class 77.5 by truck, UPS or RPS.

Shipped fully assembled in 20" x 9" x 17" carton (50.8 x 22.9 x 43.2 cm carton).

92 Series Drum Lifters for Plastic, Fiber or Steel Drum

One drum lifter to do it all! Model 92 has self-adjusting tong-like action to lift a rimmed steel, plastic or fiber drum.

These drum lifters automatically grip various common types of closed head drums. Lift a drum to or from four-drum pallets or rows of adjacent drums.

Model 92 Drum Lifter Handles

• Steel or Plastic rimmed drum 18" to 26" (46 to 66 cm) diameter
• Typical plastic rimmed 30 to 55-gallon drum (114 to 208 liter drum)
• Fiber drum 18.5" to 23" ID (47 to 87.4 cm ID), 19" to 23.5" OD (48.3 to 59.7 cm OD) with lever-lock
• Steel salvage 85-gallon (322 liter) or overpack drum

Capacity: 1,000 Lb. (454 kg).

Each Drum Lifters in the 92 Series is load tested at the factory at 125% of rated capacity in accordance with the American National Standard ASME B30.20 and a load test certificate is included with each unit.

Shipping weight: 25 Lb. (11.4 kg) Class 77.5 by truck, UPS or RPS.

Drum lifter ships fully assembled in 20" x 9" x 17" carton (50.8 x 22.9 x 43.2 cm carton).

92 Series Drum Lifters

• Model 92 is made of carbon steel
• Model 92-30 is for 15" to 23" (38.1 to 58.4 cm) diameter rimmed drum
• Model 92M has spark resistant parts made of monel
• Model 92-SS is made of type 304 stainless steel
• Model 92-5 is sized for a 5-gallon pail (19 liter) with 11" to 15" (27.9 to 38.1 cm) diameter, and has 1,000 Lb. (454 kg) capacity

NOTE: Bottom of the drum rim must be within 1" of the top of the drum. The weight of drum contents must not exceed drum manufacturer's packing limit. The drum lid must be properly secured.

41 Series Drum Lifting Hook

Model 41 Drum Lifting Hook is used to lift a horizontal 55-gallon (208 liter) steel drum, 34" to 36" (86 to 92 cm) long. This Drum Lifting Hook has an alloy steel lifting ring, steel rods, and malleable iron hooks. It adds 10.6" to the height of your apparatus when lifting a horizontal drum (measured from the drum rim to the inside top of the lifting eye).

Capacity: 1,000 Lb. (454 kg).

Model 41M has spark resistant parts

• Similar to Model 41 with the same 1,000 Lb (454 kg) capacity
• Rods are stainless steel
• Lifting ring and hooks are spark resistant aluminum/bronze alloy

Each Model 41 and Model 41M Drum Lifter is load tested at the factory at 125% of rated capacity in accordance with the American National Standard ASME B30.20 and a load test certificate is included with each unit.

42 Series Heavy-Duty Drum Slings

Model 42 Drum Sling is a heavy duty drum lifter for use on your hoist hook or fork mounted hook. Forged hooks are shaped to engage the rims at opposite ends of drum. Alloy chain, links and lifting rings are combined with heavy duty steel rod and welded eyes to provide a heavy duty assembly.

Model 42 Drum Sling has a pair of alloy steel lifting rings for two modes of lifting, as shown at left.

Drum Slings Handle

• Open top and tight head 55-gallon steel drums (208 liter steel drums)
• Capacity: 2,000 Lb. (907 kg)

Drum Sling allows two lifting modes

1. Horizontal Mode

• Use lifting ring connected to the rod and chain at middle of assembly
• Lift horizontal drum without changing its horizontal orientation

2. Off-Vertical Mode enables upending and downending drum

• Use lifting ring on outer end of alloy chain
• Lift horizontal drum and have it hang off-vertical
• Lift vertical drum by placing rod end hook under bottom rim of drum.
  As upright drum leaves floor it tilts to off-vertical position.
• Lower drum until its bottom corner meets floor, then guide the drum to settle upright or allow it to tilt down to horizontal

42 Series Drum Slings / 55-Gallon Drum Hoists

• Model 42 alloy chain, links and lifting rings; steel rod; welded eyes
• Model 42-G is the same style drum lifter with hot dip galvanized finish

Each Model 42 and Model 42-G Drum Sling is load tested at the factory at 200% of rated capacity in accordance with the American National Standard ASME B30.9 and a load test certificate is included with each unit.